Is a Long Handled Toilet Plunger Option a Good Idea?
A long handle toilet plunger is a handy tool to have around the bathroom especially if you are always trying to get that clog to go away. The long-handled toilet plunger is a long cylinder design that looks like a long metal wire with the flat end on top. To use it, you simply squeeze the cylinder and it makes a suction to draw the clog out of the toilet bowl. If the plunger gets clogged, you just push the plunger further down into the toilet until it releases the clog.
Most long handles, toilet plungers are made of stainless steel. They can be used in different pipes like the bathroom, kitchen, and laundry. Many long cylinder designs are made from iron as well. They come in various shapes depending on your need and how many inches you want them to be.
These plungers come in either a long cylinder design or a long handle design. A long cylinder design is one that looks similar to the shape of a long barbell. It usually has four handles that you can turn clockwise and anti-clockwise to reach all parts of the bowl. In a long handle plunger, you must turn it clockwise and anti-clockwise to do the job. If you don't turn the handle all the way clockwise, you could damage the plunger.
The long handle design gives you more leverage when trying to unclog the drain. This means the plunger will have a tighter grip on the drain than the short cylinder design. The long handle is also a little harder to grip than the short cylinder. That means you'll find yourself with less friction when trying to unclog the drain.
However, the long handle plunger is not perfect. If you're using a long cylinder plunger and the blockage isn't too big, then you should be able to keep up with the movement of the plunger. If the blockage is too big to fit into the plunger, you may need to get a longer cylinder plunger. They are available in both long and short handles.
If neither of these options works, try spraying the toilet to see if anything comes out. If so, then the problem is likely deeper than what you initially thought. Be prepared to remove the plunger and clean up the mess. Don't worry; it's much easier to clean up than it would be to throw the plunger away. There may even be a piece of the toilet that can be reused. This is the case with older toilets that have been sitting for a long time.
If this does not solve your problem, then the only other option is to call a plumber. It's important to know that this will cost you more money than if you simply buy a long handle plunger. The plumbing professionals will charge you for the hours it takes them to replace the plunger and clean up the mess. However, they do carry a warranty, which means that you will be fully protected.
While there are many reasons that a long handle toilet plunger might not be the best option, they are certainly worth trying. Sometimes it is a simple fix that can make a huge difference in your bathroom. Don't spend all your money in one trip to the hardware store when a simple replacement is all that it takes. Try one of these long handle toilet-plunger options to find out.