Tips For Using Roadside Emergency Lights in Emergency Situations

Mar 29, 21
Tips For Using Roadside Emergency Lights in Emergency Situations

If you're like many people, you drive a car with regular headlights and tail lights, but you've been told that having roadside emergency lights on your vehicle is a safety feature. They are not required, of course, and there are a number of good reasons to purchase them. But why? What's the real reason for roadside emergency lights?

 

There are actually two reasons to have roadside emergency lights fitted to your vehicle. The first is that they can easily be identified as to the exact location of your vehicle in case you must locate it after an accident or other emergency situation. In this respect, they act much like the well-known "Bikers' Light" used by bikers and forest rangers. It's bright white and can easily be seen from quite a distance away, which means that if you're in a road accident, these roadside lights will let others know that help is on its way.

 

The second reason to install roadside emergency lights on your vehicle is that they can also be used to indicate the location of any flares or emergency flares you may wish to use. Many rural roads throughout the United States have no roadside signs, which makes it very easy to get lost in remote areas. Even more troubling is the fact that many rural roads are poorly maintained and don't even have flashing lights at all. These two issues together can make traveling very dangerous in many parts of the country. Even if you can maneuver around a roadside hazard like a deer or a herd of cattle, there's a chance that you could get into trouble by simply driving into a field where oil or gasoline has leaked or blown out onto the roadway.

 

CLICK HERE to Get These LED Roadside Emergency Lights!

 

The most important thing to remember about roadside emergency lights is that they must be clearly visible from the roadside, which means that you can't have multiple sets installed. This is a legal requirement in most states, meaning that if you want to put multiple sets of lights on your vehicle, you will need to purchase a set of emergency lights that are specifically designed to work as a single system. Any additional lights will only distract drivers and cause them to lose focus of their surroundings, which can create a serious risk of accident. That's why it's so important to make sure that your emergency roadside lights are functioning properly and installed securely so that no one can take them off in an emergency.

 

When you install your roadside emergency lights, you need to make sure that they are bright and clear. They should be three times brighter than your normal daytime running lights, but you need to make sure that you test their brightness to be certain. It's best to keep an eye on them for at least fifteen minutes after you stop for gas so that you can be absolutely certain that they're working correctly. If they're not working correctly, then you have to go back in and replace them. Replacing your roadside emergency lights is quite easy; you just have to look for a clip or handle at the end of your emergency light, unhook the clip or handle, and replace it on the light.

 

If you have more than one set of roadside emergency lights, it's also important to be sure that they all match. If you have two sets of lights, they should both have identical clips and handles, and they should be as bright as possible. Otherwise, you're going to be wasting money by having two different sets of lights that don't match each other, which could make people more likely to try to steal your car or run into the road in it. In addition to matching up your roadside lights, you should also ensure that they all have a good sturdy harness to hang them from, so that no one can pull them off in an emergency.

 

When you are installing your lights, you need to make sure that they are mounted securely on the post. You should make sure that the mounting screws are tightened firmly, and that there aren't any weak areas that can be pulled through when you take the post apart. You also need to make sure that your emergency release button is easily accessible, so that you can quickly get out without having to use your arms or another body part to pull yourself out. If you need additional help, make sure that you have a friend or family member with you, who can distract the person who isn't following your directions.

 

As long as you follow the basic steps outlined above, you will have a minimal risk of any kind of injury when using your roadside emergency lights in an emergency. However, you should still be careful if you are going to use your lights in an emergency situation. If you are approaching an emergency vehicle, make sure that you are not obstructing its vision with your roadside emergency lights. Also, if you are in a populated area, make sure that you don't show your headlights in the headlights of any passing vehicles. You should always carry a cell phone with you, so that you can be contacted should there be an emergency, and so that you can explain what is happening to your passengers in case there is an accident.